| 1 |
L. V. Sy, Modelling Mechanical Behaviours of Polypropylene Sheet for Incremental Forming Process using graphic method, International Journal of Materials Engineering Innovation, Published Online:May 30, 2025, pp 155-174, https://doi.org/10.1504/IJMATEI.2025.146440 (Scopus, Q4) |
| 2 |
L. V. Sy, Comparison of the Ductile Damage Models for Fracture Prediction of the Incremental Sheet Forming, Int. J. Materials Engineering Innovation, Volume 16, No. 3, pp 214-231, 2025, https://doi.org/10.1504/IJMATEI.2025.147591 (Scopus, Q4) |
| 3 |
N. T. Lan, L. V. Sy et al., “Nghiên cứu chế tạo robot phát hiện ăn mòn bồn nổi hình trụ đứng chứa xăng dầu,” Dầu Khí, no. 3, pp. 66–75, 2025, doi: 10.47800/PVSI.2025.03-08. |
| 4 |
N. T. Lan and L. V. Sy, “A study on design optimization of MFL inspection system tailored for corrosion inspection of vertical storage tank by wall-climbing robots,” in Proc. 4th Int. Conf. Material, Machines, and Methods for Sustainable Development (MMMS 2024), Lecture Notes in Mechanical Engineering. Cham, Switzerland: Springer, 2025, pp. 313–322, doi: 10.1007/978-3-031-96126-7_39. |
| 5 |
N. T. Lan and L. V. Sy, “Multi-area coverage path planning optimization for vertical oil tank inspection by wall-climbing robot,” in Proc. 3rd Vietnam Symp. Advances in Offshore Engineering, Lecture Notes in Civil Engineering, vol. 590. Singapore: Springer, 2025, pp. 643–652, doi: 10.1007/978-981-96-3912-0_62. |
| 6 |
T. L. Nguyen et al., “Design of tank inspection robot using permanent magnetic wheels,” International Review of Mechanical Engineering, vol. 18, no. 9, pp. 481–490, Sep. 2024, doi: 10.15866/ireme.v18i9.25612. |
| 7 |
N. T. Lan et al., “Enhancing inverted pendulum control using the ultimate period method under random disturbances,” U.P.B. Scientific Bulletin, Series D, vol. 86, no. 4, pp. xx–xx, 2024. |
| 8 |
N. T. Lan and H. K. Tâm, “Nghiên cứu ứng dụng robot và phương pháp kiểm tra không phá hủy trong đánh giá ăn mòn bồn chứa nhiên liệu,” Dầu Khí, no. 5, pp. 69–78, 2024, doi: 10.47800/PVSI.2024.05-08. |
| 9 |
L. V. Sy and N. T. Lan, “Selecting the inlet configuration for gas–liquid cylindrical cyclone separator,” IOP Conference Series: Materials Science and Engineering, vol. 1294, no. 1, Art. no. 012008, Dec. 2023, doi: 10.1088/1757-899X/1294/1/012008. |
| 10 |
L. V. Sy et al., Novel tolerance sensor arms and magnetic sensor shoes for transverse flaw inspection module of the EMI system, The Third International Conference on Material, Machines, and Methods for Sustainable Development MMMS2022, |
| 11 |
L. V. Sy et al., Influence of Operating Factors on Accurate Digging Depth Control of the Remote-Controlled Explosive Disposal Machine, Journal of Mechanical Engineering, Vol 20(3), 371-386, 2023, https://doi.org/10.24191/jmeche.v20i2.22050
(Scopus, Q3)
|
| 12 |
L. V. Sy et al., Naturally Occurring Radioactive Material waste management in the ASEAN oil and gas industry: a review, Journal of Hazardous, Toxic, and Radioactive Waste,vol. 28(3): 1247, 2023, https://ascelibrary.org/doi/10.1061/JHTRBP.HZENG-1247 (ESCI, Q2) |
| 13 |
L. V. Sy et al., A Review of Mercury Waste Management in the ASEAN Oil and Gas Industry, Journal of Hazardous, Toxic, and Radioactive Waste, vol. 27(1): 04022044, 2023 https://doi.org/10.1061/(ASCE)HZ.2153-5515.0000737 (ESCI, Q2) |
| 14 |
L. V. Sy et al., Challenges And Prospects of Hazardous Waste Management In Asean Offshore Decommissioning, 3rd International Conference on the Decommissioning of Offshore & Subsea Structures (DECOM – 2022), pp 29-43. |
| 15 |
L. V. Sy et al., Influence of lubricants and lubricating methods on surface roughness in the two‑point incremental sheet forming process, The International Journal of Advanced Manufacturing Technology, Vol. 121, pp 1365–1372, 2022, https://doi.org/10.1007/s00170-022-09435-2 (SCIE, Q1) |
| 16 |
L. V. Sy et al., An Investigation of the Role of Calciumin the Microstructure of Mg-5Al-4Sn-Based Alloys and PittingCorrosion Resistance, Journal of Materials Engineering and Performance, Vol. 31,pp 8830–8839, 2022, https://doi.org/10.1007/s11665-022-06910-5 (SCIE, Q2) |
| 17 |
L. V. Sy et al., Nghiên Cứu Chế Tạo Bộ Thiết Bị Phát Hiện Khuyết Tật Các Ống Thép Rời, Đường Kính Nhỏ Bằng Phương Pháp Rò Rỉ Đường Sức Từ, Tạp chí Dầu khí, vol. 3/2022, pp. 26-34, https://doi.org/10.47800/PVJ.2022.03-04 |
| 18 |
L. V. Sy et al., Accurate measurement of pipe wall reduction: High-precision instrument and minimization of uncertainties, Measurement, https://doi.org/10.1016/j.measurement.2022.112190 (SCIE, Q1) |
| 19 |
L. V. Sy et al., Influence of Machining Parameters on the TPIF Formability for Aluminum Sheet at Room Temperature, Proccesdings in the Second International Conference on Material, Machines, and Methods for Sustainable Development (MMMS2020), Nha Trang 2021, https://doi.org/10.1007/978-3-030-69610-8_129 (Scopus, Q3) |
| 20 |
L. V. Sy et al., Modelling and Simulation of the Hydraulic System on EODM Machine, Proccesdings in the Second International Conference on Material, Machines, and Methods for Sustainable Development (MMMS2020), Nha Trang 2021, https://doi.org/10.1007/978-3-030-69610-8_129 (Scopus, Q3) |
| 21 |
L. V. Sy et al., Effect of Lubrication on Deforming the Aluminum Sheet with Two Points Incremental Forming Technology, Proccesdings in the Second International Conference on Material, Machines, and Methods for Sustainable Development (MMMS2020), Nha Trang 2021, https://doi.org/10.1007/978-3-030-69610-8_129 (Scopus, Q3) |
| 22 |
L. V. Sy et al., Finite Element Simulation of The Formability by TPIF Technology For Aluminum Sheet at Room Temperature, Proccesdings in the Second International Conference on Material, Machines, and Methods for Sustainable Development (MMMS2020), Nha Trang 2021, https://doi.org/10.1007/978-3-030-69610-8_129 (Scopus, Q3) |
| 23 |
L. V. Sy et al., Study on Cutting Power of Motorized Spindle using for Circular End Milling Process, Proccesdings in the Second International Conference on Material, Machines, and Methods for Sustainable Development (MMMS2020), Nha Trang 2021, https://doi.org/10.1007/978-3-030-69610-8_129 (Scopus, Q3) |
| 24 |
L. V. Sy et al., Dynamic Analysis and Simulation of the Hydraulic Control System on the Remote-Controlled Explosive Ordnance Disposal Machine, International Journal of Manufacturing, Materials, and Mechanical Engineering (IJMMME), Vol 11-3, 18-27, http://doi.org/10.4018/IJMMME.2021070103 (ESCI, Q4) |
| 25 |
L. V. Sy et al., Planar Hall sensor for quantitative measurement of pipe wall thickness reduction based on the magnetic flux density method, Measurement, https://doi.org/10.1016/j.measurement.2021.109782 (SCIE, Q1) |
| 26 |
L. V. Sy et al., Sử dụng van tỷ lệ và van giảm áp trong điều khiển chính xác lực kẹp bom của máy đào gắp bom điều khiển từ xa, Tạp Chí Khoa Học Công Nghệ Hàng Hải,pp. 407-411, https://jmst.vimaru.edu.vn/index.php/tckhcnhh/article/view/221 |
| 27 |
L. V. Sy et al., Multi-Objective Optimization of Processing Parameters In WEDM With Stainless Steel-304 For Dieangular Cutting, Strojnicky Casopis - Journal of Mechanical Engineering, vol.71-2, 2021, pp.141-150, https://doi.org/10.2478/scjme-2021-0025 (Scopus, Q3) |
| 28 |
L. V. Sy et al., Mechanical Design of Drill Pipe Inspection Machine, Advances in Asian Mechanism and Machine Science. ASIAN MMS 2021. Mechanisms and Machine Science, vol 113. Springer, Cham, pp. 324–334, https://doi.org/10.1007/978-3-030-91892-7_30 |
| 29 |
L. V. Sy et al., Đánh giá thành phần vận tốc hướng kính với công thức thực nghiệm trong bộ tách dầu/khí GLCC, Hội nghị Khoa học toàn quốc về Máy thủy khí và Hệ thống tự động hóa 2021
pp. 372 – 380.
|
| 30 |
L. V. Sy, Novel Steel Pipe Inspection System Based on Orthogonal Magnetizer, Proceedings of the International Conference on Advanced Mechanical Engineering, Automation, and Sustainable Development 2021 (AMAS2021), pp. 900–905, https://doi.org/10.1007/978-3-030-99666-6_132 |
| 31 |
L. V. Sy et al., A MIMO robust servo controller for two wheeled automated guided vehicles using a differential operator, Proceedings of the 2020 KSPSE Spring Conference
pp. 49-50,
|
| 32 |
L. V. Sy et al., Experimental Study on Kinematic Parameter and Undulating Pattern Influencing Thrust Performance of Biomimetic Underwater Undulating Driven Propulsor, International Journal of Mechanical and Mechatronics Engineering (IJMME), Vol 20-05, 142-148. |
